Water-Wash Resin 2.0
Couldn't load pickup availability
Water-washable, More Environmental Friendly
Thanks to the integration of hydrophilic materials, you can now effortlessly remove residual resin with just water. This innovation not only simplifies post-processing but also makes it more cost-effective, safer, and environmentally friendly than ever before.
High-resilience, Less Prone to Cracking
With an impressive elongation rate of 16.62%, the model achieves exceptional toughness post-curing, enhancing its durability, strength, and resistance to cracking.
Less Odor, More Environmental Friendly
The optimized water-washable formula significantly reduces resin odor during both storage and printing, greatly enhancing the user experience. This enhances the movement, not only making the process more environmentally friendly but also ensuring a more comfortable and pleasant printing experience.
Lower Shrinkage Rate, High-precision Models
Achieving a minimal dimensional accuracy of 0.15mm, boasting unparalleled surface details for miniature models.
Anti-yellowing, Staying Vibrant
The upgraded formula delivers enhanced anti-yellowing performance to ensure models maintain their original color vibrancy even after prolonged exposure. This breakthrough is especially effective in white and transparent resins.
Low viscosity for Consistent Performance
Water Wash Resin 2.0 retains its low viscosity in cooler environments (15°C-20°C), ensuring effortless flow and consistent performance. Enhanced platform adhesion delivers stable, high-quality prints even in lower temperatures.
A Wide Compatibility
The optimized water washable formula significantly reduces resin odor during both storage and printing, greatly enhancing the user experience. This improvement not only makes the process more environmentally friendly but also ensures a more comfortable and pleasant printing experience.
Resin Parameters
Color Type
Recommended Printing Parameters
| Printer Model | Layer Thickness | Exposure Time | Light-Off Time | Bottom Exposure Time | Bottom Layers | Z Lift Distance | Z Lift Speed | Z Retract Speed |
| Photon Mono M7 Max | 0.05 mm | 2 s | 0.5 s | 30 s | 5 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 Pro | 0.05 mm | 2 s | 0.5 s | 25 s | 4 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M7 | 0.05 mm | 2.5 s | 1 s | 35 s | 4 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono 4 Ultra | 0.05 mm | 2.6 s | 1 s | 30 s | 5 | 5 mm | 8 mm/s | 8 mm/s |
| Photon Mono 4 | 0.05 mm | 2.8 s | 1 s | 30 s | 5 | 6 mm | 4 mm/s | 6 mm/s |
| Photon Mono M5s Pro | 0.05 mm | 3.6 s | 0.5 s | 30 s | 5 | 8 mm | 6 mm/s | 6 mm/s |
| Photon Mono M5s | 0.05 mm | 2.8 s | 0.5 s | 25 s | 5 | 8 mm | 5 mm/s | 6 mm/s |
| Photon Mono M5 | 0.05 mm | 2.8 s | 0.5 s | 25 s | 5 | 8 mm | 5 mm/s | 6 mm/s |
Instructions for Use
(1) Before use:
Shake the liquid resin before use. Clean the resin tank and the molding platform to keep the bottom of the resin tank in good condition for light transmission.
(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements. Select the correct print parameters and settings for printing.
(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol(≥95%), lactate, or isopropyl alcohol cleaning solution;
(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade.
B. Submerge the model in the cleaning solution, rinse or ultrasonically wash, then take out and drain; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
C.Proper processing, such as removing support, polishing, coloring, etc.
Precautions
- The ideal condition for storing uncured resin is a cool, dark place at room temperature and protected from light to avoid high temperature or sunlight.
- Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect; thus, the resin can be properly preheated before use (not more than 60°C).
- If the resin pigment settles, it can be used after stirring or shaking.
- In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
- To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
- To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
(1) The intensity of the mercury lamp or LED light source is 5-10 mW/m², and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
(4) It is recommended to print in a dark room or be covered with a lid while printing, as resin is a photosensitive material.
PS: Material properties will vary depending on the molding equipment, post-curing method, and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems while using it, please feel free to contact us.
