When it comes to resin 3D printing, what happens after the print finishes is just as important as the printing itself. Cleaning and curing a model properly ensures not only its durability and finish but also protects you from sticky messes and wasted time. But here’s the problem: most cleaning and curing stations simply can’t keep up with today’s large-format LCD printers—until now.
Introducing the Anycubic Wash & Cure 3 Max, the next solutions in post-processing for resin 3D printing. Designed to solve real pain points faced by users of modern, high-performance printers, this all-in-one machine is packed with thoughtful innovations that make it a must-have for hobbyists and pros alike.
1. Size Limitations: Outgrown by Bigger 3D Printers
Many wash & cure stations were designed for smaller models, forcing users to split big prints or manually clean oversized parts. Upgrading to a larger LCD printer (like the Photon Mono M7 Max) often means buying a new cleaning station—an unnecessary extra cost.
✅ Solution: The Wash & Cure 3 Max boasts the largest cleaning chamber in its class (305×165×300mm), handling the biggest models from the vast majority of high-resolution LCD printers on the market today, all in one go. No cutting, no multiple cleaning cycles—just drop in your print and let the machine do the work.
2. Inconsistent Cleaning: Resin Residue & Missed Spots
Hand-washing relies on guesswork—did you scrub enough? Are tiny crevices truly clean?
✅ Solution: The dual cleaning (spray wash + bottom soak cleaning) of Wash & Cure 3 Max ensures zero residue:
● 12 high-pressure fan jet with a rotating cleaning basket, blast resin off surfaces from every angle.
● Bottom soak cleaning tackles trapped resin from the bottom and any crevices.
● Smooth rotation prevents model imbalance, ensuring thorough cleaning.
3. Tedious, Multi-Step Manual Work
Manual washing means:
● Wearing gloves, scrubbing with brushes.
● Transferring prints between containers.
● Waiting for curing in a separate machine.
● Cleaning up spilled alcohol afterward.
✅ Solution: The Wash & Cure 3 Max automates everything:
- Place your model inside.
- Close the lid.
- Press Auto Mode.
- Wait (or grab a coffee).
- Retrieve a fully cleaned and cured model.
No touching uncured resin. No messy cleanup. Just perfect results every time.
4. Wasted Alcohol & High Running Costs
Traditional immersion washing soaks prints in large alcohol baths, consuming a large amount of alcohol for big models. That’s expensive and environmentally unfriendly.
✅ Solution: With Wash & Cure 3 Max, the spray wash + bottom soak cleaning cut alcohol use by ~50%—only 4L needed for a 25cm (10-inch) model, compared to 8.5L by traditional solution.
5. Inflexible Curing & Washing Settings
Different models need different treatment:
● Highly detailed miniatures → Longer wash cycles.
● Large solid models → Extended curing.
Some machines force a fixed cycle, wasting time for extra washing or curing.
✅ Solution: Choose certain operation (wash or cure）and adjust times in Wash & Cure 3 Max—for optimal results.
Who Should Buy the Wash & Cure 3 Max?
✔ Owners of large-format resin printers (like Anycubic Photon Mono M7 Max).
✔ High-volume makers who batch-process multiple models.
✔ Professionals & hobbyists who demand flawless, automated post-processing.
✔ Anyone tired of manual washing and wasted alcohol.
Final Verdict: The Best Wash & Cure Station for Resin 3D Printing
The Anycubic Wash & Cure 3 Max eliminates the biggest headaches in resin post-processing:
✅ No more size limitations—works with today’s largest prints.
✅ No more inconsistent cleaning—spray + bottom soak cleaning ensures 100% resin removal.
✅ No more manual labor—fully automated with one-button operation.
✅ No more wasted alcohol—almost 50% less consumption than traditional methods (for 10-inch model).
If you’re serious about resin 3D printing, this is probably the last wash & cure station you’ll ever need.
Upgrade your workflow today—check out the [Anycubic Wash & Cure 3 Max]!
