1. About Us
The Anycubic Share (hereinafter referred to as this "event") is an online giveaway event operated by Shenzhen Anycubic Technology Co., Ltd and its relevant affiliates (hereinafter referred to as "Anycubic", "we", "us", or "our") on social media platforms including Facebook, Instagram, X, Youtube, Tiktok and Reddit. In this Terms & Conditions (as defined below), "you" and "user" refer to any individual that uses and/or accesses the Services.
By participating this event, you are entering into a binding legal agreement with us and are agreeing to this Terms & Conditions. If you do not accept this Terms & Conditions, you are not eligible for this Event.
This Event is exclusively for users of the Kobra S1 Combo and Photon Mono M7 Pro. Future events may include additional participants at our discretion.
2. Event Period
The Event commences on April 8, 2025, and concludes on April 25, 2025 (the "Event Period"). The Event is divided into two stages:
● Stage 1: April 8, 2025, to April 16, 2025 – Open to Anycubic Kobra S1 Combo users.
● Stage 2: April 17, 2025, to April 25, 2025 – Open to Anycubic Photon Mono M7 Pro users.
Entries submitted outside the designated stage dates or the Event Period will be deemed ineligible.
All Event times are set according to Greenwich Mean Time (GMT).
3. Eligibility
3.1 Participants must have a valid social media account and email to join the Event.
3.2 Your submissions must be original or fully authorized by the right owner and not have been authorized for commercial use to any organization or individual, whether paid or unpaid.
3.3 You may be disqualified if:
● Your submission is found to be plagiarized by the review panel.
● You are deemed ineligible for participation at the time of judging.
● You provide false information or violate relevant laws and regulations.
● Your submission infringes upon any third-party legal rights, including but not limited to intellectual property, privacy, confidentiality, reputation, or personality rights.
4. How to Participate
To enter, participants must:
1️⃣ Follow Anycubic’s Official Account: Follow our official account on one of the following platforms:
Facebook:
● Global: https://www.facebook.com/ANYCUBIC3dprinter
● Deutschland: https://www.facebook.com/AnycubicDe
Instagram:
● Global: https://www.instagram.com/anycubicofficial/
● Deutschland: https://www.instagram.com/anycubic_deutschland/
X: https://x.com/anycubic3dprint
YouTube: https://www.youtube.com/c/ANYCUBIC3D
TikTok: https://www.tiktok.com/@anycubic
Reddit: https://www.reddit.com/r/AnycubicOfficial/
2️⃣ Submit Content: Post a video or image based on the following themes:
● Stage 1: Content related to the Anycubic Kobra S1 Combo (e.g., photos/videos of the printer or items printed with it).
● Stage 2: Content related to the Anycubic Photon Mono M7 Pro (e.g., photos/videos of the printer or items printed with it).
3️⃣ Tag and Hashtag: Include the following in your post: Tag or mention (@) the official Anycubic account on your chosen platform.
● Use the hashtags #Anycubic and #AnycubicShare.
● For Stage 1, add #KobraS1Combo.
● For Stage 2, add #PhotonMonoM7Pro.
4️⃣ Prize Request: Complete the online prize request form at Anycubic 3D Printer | For Freedom to Make. Incomplete or incorrect submissions may result in forfeiture of the prize. （blog中这个部分highlight）
5. Winner Selection and Prizes
5.1 Eligibility for Prizes:
● Participants who purchased an Anycubic Kobra S1 Combo or Photon Mono M7 Pro from the official Anycubic website store or Amazon official store are eligible to win.
○ Prizes:
○ Kobra S1 Combo users: 2KG of Filament.
○ Photon Mono M7 Pro users: 2KG of Resin.
The number of prizes a participant is eligible to receive will be determined by the number of printers they have purchased under a valid order.
For every qualifying machine in the same order, the corresponding prize(s) will be multiplied accordingly.
Example:
If a participant purchased 5 units of the Kobra S1 Combo from the official Anycubic Amazon store, they will receive 2 rolls of filament × 5 = 10 rolls of filament as the prize.
5.2 Prize Conditions:
● Purchases must be verifiable and authentic.
● Submissions must comply with these T&Cs and Event rules.
● Participants must successfully submit the online prize request form.Anycubic 3D Printer | For Freedom to Make
5.3 Prize Delivery:
● Prizes will be shipped within three (3) months of a successful prize request submission.
● Participants will receive a notification email once the prize is dispatched.
6. General Terms
6.1 Participants guarantee that the submitted content is legal and compliant. If the organizer incurs losses due to the infringement or non-compliance of the content, the participant shall be fully liable for compensation.
6.2 When discovering any infringement, the organizer has the right to retrieve the prizes and demand compensation for the losses.
6.3 Participants are required to provide the official purchase certificate simultaneously when submitting the content. The organizer reserves the right to verify. False information will lead to disqualification.
6.4 Participants can claim prizes once for the same order.
7. Privacy & Data Protection
By participating, participants agree that their personal information may be collected, used, and processed for Event purposes, in accordance with Anycubic’s Privacy Policy, such as official posts for promoting the Event. If an award cannot be distributed to you due to incomplete personal information, it shall be deemed that you have waived the right to claim the award, and no award shall be distributed to you.
On our official social media, we may display the personal information and submissions of the authors with their consent, and display winning works and the winners' information as required for the contest. You may view these works and the winning information on this Website or other social media.
8. Disclaimers
9.1 While Anycubic will include accurate and up-to-date information on our social media platforms, Anycubic makes no guarantees about the accuracy, correctness, reliability, or otherwise with respect to such information, and assumes no liability or responsibility for any omissions or errors (including but not limited to typo graphical errors and technical errors) in the content.
9.2 To the maximum extent permitted by applicable laws, your participation in the Event is at your own risk.
9. Contacting Us
If you have any questions about these Terms & Conditions, please contact us through the official email address: marketing@anycubic.com.We will reply as soon as possible.