1. Why Join
Tired of failed prints? Proud of your fixing skills? Join our #FixThatPrint Challenge and show the world how you turned #PrintDisasters into masterpieces!
● Learn from the hacks!
● Win shoutouts & awesome prizes!
● Prove that every fail is a step toward success!
2. Challenge Period
The Challenge starts on 2025-09-20 and ends on 2025-10-08 (the“Challenge Period”). Only entries submitted during the Challenge Period will be considered.
The winner announcement will be made on 2025-10-17 via Facebook, Instagram, and Tiktok. Winners must respond by 2025-10-31 or the prize will be forfeited.
All Event times are set according to Greenwich Mean Time (GMT).
3. Eligibility
The Challenge is open to all. However, please pay attention to the following:
3.1 Participants must have a valid social media account and email to join the Challenge.
3.2 Your submissions must be original or fully authorized by the rights owner and not have been authorized for commercial use to any organization or individual, whether paid or unpaid.
3.3 You may be disqualified if:
● Your submission is found to be plagiarized by the review panel.
● You are deemed ineligible for participation at the time of judging.
● You provide false information or violate relevant laws and regulations.
● Your submission infringes upon any third-party legal rights, including but not limited to intellectual property, privacy, confidentiality, reputation, or personality rights.
4. How to Participate
To enter, participants must:
1️⃣ Follow Anycubic official account on your preferred social media platform among Facebook, Instagram and TikTok. The account name may be different across the platforms, please refer to the link we provided.
Facebook:
● Global: https://www.facebook.com/ANYCUBIC3dprinter
● Deutschland: https://www.facebook.com/AnycubicDe
Instagram:
● Global: https://www.instagram.com/anycubicofficial/
● Deutschland: https://www.instagram.com/anycubic_deutschland/
TikTok: https://www.tiktok.com/@anycubic
2️⃣ Post a video or image based on one of these themes:
√ Show your "before & after" video – the struggle & the success!
Need ideas? Watch our video to see how we rescued a doomed print
√ Post with #FixThatPrint, follow us, and tag us!
√ Open to ALL 3D printers - no matter what brand or model you use!
√ Hardware fixes or slicer tweaks - all print improvements welcome!
5. Winner Selection
Your video MUST show:
1️⃣ The original failed print
2️⃣ Your adjustment process (hardware/slicer changes)
3️⃣ The final improved result
PS: Don't forget to share your funny printing moments too—you might get a surprise!
6. Prizes
● 4 × Kobra S1C + 2kg Filament
● 10× 10kg Filament
Prizes are non-transferable and cannot be exchanged for cash. Anycubic reserves the right to substitute any prize with another of equal or greater value.
Each individual can only win once throughout the challenge, regardless of the number of entries submitted or the number of platforms participated in. However, posting more high-quality posts will increase the chances of winning!
The prize delivery for this event follows the same free shipping policy as our official website. If your location is not within our website's free shipping regions but you win a prize, you will need to cover the shipping cost.
7. General Terms
Anycubic reserves the right to disqualify any entry that violates these T&Cs.
Anycubic is not responsible for any technical issues, lost entries, or incomplete submissions.
Anycubic reserves the right to modify, suspend, or cancel the Event without prior notice.
8. Privacy & Data Protection
By participating, participants agree that their personal information may be collected, used, and processed for Campaign purposes, in accordance with Anycubic's Privacy Policy, such as official posts for promoting the challenge. If an award cannot be distributed to you due to incomplete personal information, it shall be deemed that you have waived the right to claim the award, and no award shall be distributed to you.
On our official social media, we may display the personal information and submissions of the authors with their consent, and display winning works and the winners' information as required for the contest. You may view these works and the winning information on this Website or other social media.
9. Disclaimers
9.1 While Anycubic will include accurate and up-to-date information on our social media platforms, Anycubic makes no guarantees about the accuracy, correctness, reliability, or otherwise with respect to such information, and assumes no liability or responsibility for any omissions or errors (including but not limited to typo graphical errors and technical errors) in the content.
9.2 To the maximum extent permitted by applicable laws, your participation in the Challenge is at your own risk.
10. Contacting Us
If you have any questions about this Terms & Conditions, please contact us through the official email address: marketing@anycubic.com . We will reply as soon as possible.
