Name: PLA High Speed 10-100kg Deals
Brand: ANYCUBIC
SKU: 10P-AHHSBK-103
Price: 119.99 USD
Availability: InStock
Rating: 5.0 (10 reviews)

$119.99

$119.99 ~~$279.90~~

Features

File Download

Specification

Color Type

Reviews

FAQs

$119.99

$119.99 ~~$279.90~~

Add to cart

High Speed PLA Filament

High Speed, High Quality, The Efficient Partner

Boosting Efficiency with Intelligent Identification

The filaments feature intelligent identification chips that integrate seamlessly with the ACE Pro, allowing for automatic identification of printing information and enhancing the printing experience.

*The intelligent identification feature requires an internet connection and Anycubic-brand intelligent identification-compatible filaments.

Boosting Speed with High-Speed Core

Up to 12x[1] faster output, pairing with the high-speed 3D printer. Perfect for high-speed 3D printing.

[1]The high-speed PLA supports print speeds up to 600mm/s compared to a standard print speed of 50mm/s.Anycubic Lab provides the slicing results for the Anycubic Kobra S1; the result is for preference only.

High Fluidity Rapid Shaping

Compared to standard PLA filaments, the high-speed PLA filaments boast enhanced fluidity and better cooling effect, ensuring smooth and consistent feeding for filaments after melting, and rapid model cooling and shaping.

Efficiency Meets Quality All-in-One

Enhance printing efficiency while ensuring excellent results. Achieve smooth and delicate surfaces on models, especially on overhanging parts.

With high toughness and low shrinkage, it provides top-tier quality for your printing creation.

Uninterrupted Fun Worry-free Printing

Uninterrupted material output is guaranteed with superior flow and its good cooling effect, ensuring no clogs, no shortage, and no bunching during high-speed printing.

Its uniform and seamless filament diameter eliminates the risk of tangles. Compatible with both high-speed and standard 3D printers on the market.

Reusable Filament Spool

The reusable filament spool incorporates a threaded connection system engineered for enhanced stability when paired with spool-free filaments. This design significantly reduces the risk of entanglement, filament scattering, and operational errors.

Material Performance

Filament Installation

1. Label the Filament

Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.

2. Load the Filament

Open the spool, align the filament with the latch, and snap it into place.

3. Locking the Spool

Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.

4. Prepare the Filament

Once the spool is locked, remove the bonding strap and thread the filament into the spool hole.

User Application Scenarios

File Download

Specification

Dry Out Before Use

Recommended

Drying Condition

45-50℃, 6-8h

ACE Compatibility

Compatible

Nozzle Size

Recommended 0.2 mm or above

Heated Bed Temperature

55-65 ℃

Recommended Printing Speed

190-210℃, 50-150 mm/s; 210-230°C, 150-300 mm/s; 230-260°C, 300-600 mm/s

Cooling Time

7 s

Maximum Volume Speed (Flow Rate)

18 mm³/s

Density

1.19 g/cm³

Melt Index

13~16 g/10 min (190℃/2.16kg)

Melting Point Temperature

157 ℃

Heat Deflection Temperature (0.45MPa)

52 ℃

Bending Modulus

3905±300 MPa

Bending Strength

82±8 MPa

lzod lmpact Strength (X-Y)

21±1 kJ/m²

Filament Type

General filaments

Recommend to Print

Toys, decorative parts, and fandom

Intelligent Identification

Supported

Reusable Filament Spool

Supported

Color Type

ColorHex CodeDisplay

Pearl Black#212721

Bright White#F1F0ED

Texture Grey#75787B

Bright Red#E10600

Dazzling Blue#3E55AB

Classic Green#3DB24E

Vibrant Orange#FF7338

Vibrant Yellow#FDDB27

Purple Opulence#695FA2

Strawberry Pink#F88192

FAQs

Where can I learn about the settings for different filaments?

Click here to learn about filament settings here.

If I buy 3KG of filament, will I receive a single 3KG roll?

No. All our filaments are packaged in 1KG rolls. For example, if you purchase 3KG, you will receive three separate 1KG rolls rather than one 3KG roll. The same rule applies to other quantities as well.

Can I still use Anycubic PLA if my printer does not support intelligent identification?

Absolutely. Anycubic PLA is compatible with all 1.75mm filament-supported printers, even if they lack intelligent identification chip functionality.

Does the Intelligent Identification feature require additional setup or operation?

No extra setup is needed. Supported printers automatically read the filament information, providing a seamless and convenient user experience.

What should I do if the filament I received has problems with quantity, color, or other problems?

If there are any problems with the filament you received, please contact our support team for answers.

Where can I view parameter comparisons for various filament?

You can click here to view parameter comparisons for currently available filament.

What are the advantages of High Speed PLA?

Compared with PLA, the toughness is enhanced, and the molding effect is better.

What is the difference between the old and new versions of filaments?

Different batches of filaments will have slight differences in color, and the latest batch of new materials will use detachable trays. The old and new types will be shipped randomly. Please be aware of this.

Can it be Intelligent Identified? Does the Intelligent Identification feature require additional setup or operation?

Yes. No extra setup is needed. Supported printers automatically read the filament information, providing a seamless and convenient user experience.

Where can I download the model for free?

Click here to download the free model.

Is the filament certified? Where can I download the relevant certification certificates?

All of our filaments comply with RoHS, REACH, and SDS certifications and have obtained the corresponding certification reports. Click here to download the MSDS/SDS of them.