Name: PLA Special 10-100kg Deals
Brand: ANYCUBIC
SKU: 10P-HPL18-103
Price: 109.99 USD
Availability: InStock
Rating: 4.1 (8 reviews)

--: --: --: --

Kobra X New Launch: Early Bird Price $279 >

United States (English / $ USD)

$109.99

$109.99 ~~$299.90~~

Features

File Download

Specification

Color Type

Reviews

FAQs

$109.99

$109.99 ~~$299.90~~

Add to cart

Anycubic PLA Special

Neat Winding | No Bubble |Clog-free | Eco-friendly

Peach Pink
Interstellar Violet
Spring Leaf
Tropical Turquoise

Neat winding

Neat winding minimizes the filament tangle.ensure a smooth printing experience.

Even Filment Diameter

We offer +0.02mm precision and highly-consistent colorsin our filaments to bring high quality 3D printing.

Eco-friendly

PLA is made from lactic acid, which is produced via starch fermentation during corn(or other plant) wet milling, it's a biodegradableand eco-friendly material.

Effortless Intelligent Printing

The Anycubic Color Engine Pro precisely detects Intelligent Identification Filament, automatically optimizing printer settings for the best results. No more tedious and complicated setup adjustments-just load the filaments and start printing!

Reusable Filament Spool

The reusable filament spool incorporates a threaded connection system engineered for enhanced stability when paired with spoo-free filaments. This design significantly reduces the risk of entanglement, filament scattering,and operational errors.

*You can keep the spool for future use - saving costs and minimizing waste with every refill.

Applicable Printer

It is widely compatible with all FDM 3D printers on the market.

Material Performance

Filament Installation

1. Label the Filament

Remove both stickers and both chips. (if present.) Install new chip stickers onto both flanges.

2. Load the Filament

Open the spool, align the filament with the latch, and snap it into place.

3. Locking the Spool

Close the spool, press firmly, and rotate until you hear a “click," confirming it's locked.

4. Prepare the Filament

Once the spool is locked, remove the bonding strap and thread the filament into the spool hole.

User Application Scenarios

File Download

Specification

Dry Out Before Use

Recommended

Drying Condition

45-50 ℃, 6-8 h

ACE Compatibility

Compatible

Nozzle Size

Recommended 0.2 mm or above

Printing Temperature

190-230 ℃

Heated Bed Temperature

55-56 ℃

Recommended Printing Speed

50-200 mm/s

Cooling Time

8 s

Maximum Volume Speed (Flow Rate)

12 mm³/s

Density

1.24 g/cm³

Melt Index

4~10 g/10 min (190 ℃/2.16 kg)

Melting Point Temperature

166 ℃

Vicat Softening Temperature

55 ℃

Heat Deflection Temperature (0.45MPa)

54 ℃

Young's Modulus

2534±85 Mpa

Tensile Strength

48±5 Mpa

Elongation at Break

8±1%

Bending Modulus

3360±100 Mpa

Bending Strength

90±3 MPa

lzod lmpact Strength (X-Y)

22±2 kJ/m²

Tensile Strength (Z)

26±1 MPa

Filament Type

General filaments

Recommend to Print

Toys, decorative parts, and fandom

Intelligent Identification

Supported

Reusable Filament Spool

Supported

Color Type

ColorHex CodeDisplay

Peach Pink#FFC196

Interstellar Violet#5B618F

Tropical Turquoise#009CBD

Spring Leaf#89A84F

FAQs

Where can I learn about the settings for different filaments?

Click here to learn about filament settings here.

If I buy 3KG of filament, will I receive a single 3KG roll?

No. All our filaments are packaged in 1KG rolls. For example, if you purchase 3KG, you will receive three separate 1KG rolls rather than one 3KG roll. The same rule applies to other quantities as well.

Can I still use Anycubic PLA Special if my printer does not support intelligent identification?

Absolutely. Anycubic PLA Special is compatible with all 1.75mm filament-supported printers, even if they lack intelligent identification chip functionality.