Anycubic Kobra Plus is a powerful performer in the Kobra series, compared to another popular printer favored by many makers - Mega X. This article will provide you with information on their bed leveling, build volume, printing speed, Z-axis, and display, highlighting the differences between them.
|Anycubic Kobra Plus
|Anycubic Mega X
|300 x 300 x 350mm
|300 x 300 x 305mm
|Double threaded rods
|Single threaded rod
|4.3" touch screen
|3.5" touch screen
|560 x 546 x 605mm
|500 x 500 x 553mm
1. Bed Leveling
Leveling the bed ensures that the nozzle is at the same height across the entire print bed. An uneven bed on a 3D printer can cause poor quality results and scratches to the bed. Mega X requires manual leveling to calibrate the bed, where the user needs to repeatedly adjust screws at the bottom of the heated bed by hand. However, Anycubic Kobra Plus features the self-developed Anycubic LeviQ, which enables precise automatic bed leveling with 25 points on the print bed. Compared to traditional leveling methods, automatic bed leveling is easier to use, reduces setup time, and improves the success rate of prints.
2. Build Volume
Large-format 3D printers are highly appealing to many 3D enthusiasts because they offer the ability to print objects of various sizes without limitations. In comparison to Mega X, Kobra Plus offers a larger build area up to 300 x 300 x 350mm, capable of meeting the needs of most makers.
3. Printing Speed
The average speed of Kobra Plus is 100mm/s, which is equivalent to the maximum printing speed of Mega X. However, Kobra Plus can achieve a maximum printing speed of 180mm/s. And high-speed printing requires strong hardware support, such as a more powerful extruder and fans. Compared to Mega X, Kobra Plus features a 45W high-power metal heating system for efficient filament melting, as well as 6000RPM dual fans for fast model cooling.
Stepper motors in the Z-axis drive the threaded rod to rotate, thus controlling the print head to move up and down. Mega X just has a single stepper motor, while Anycubic Kobra Plus is equipped with dual Z-axis stepper motors and a belt system that lightens the weight of the X-axis. This design ensures stability during printing.
Unlike the Mega X with a 3.5'' display, Anycubic Kobra Plus has a larger screen with a more intuitive user interface design. This display is a 4.3'' touch screen and upgraded UI design, enabling users to conveniently control and manage the 3D printing process.
Which One is Right for You?
Based on the above comparison, obviously Anycubic Kobra Plus wins the game. It offers a superior printing experience with features such as a larger building area, easy auto-leveling, faster printing speed, and a more stable frame. Additionally, Mega X has been sold out and discontinued on the market. If you're looking to upgrade your printer, Kobra Plus is definitely an excellent choice.
Finally, here's a helpful tip: keep an eye on the Anycubic official website as they frequently offer special deals and promotions for their products.