Name: ABS-Like Resin Pro 2 10-100kg Deals
Brand: ANYCUBIC
Price: 199.99 USD
Availability: InStock
Rating: 4.9 (15 reviews)

$199.99

~~$389.90~~ $199.99

US / 10KG / White

ANYCUBICPLA Basic 10-20kg Deals

ANYCUBICPLA Pantone 10-100kg Deals

ANYCUBIC ABS-Like Resin Pro 2

Toughness Upgrade|High-Success Rate|Low-Odor

Strong & Tough

Based on the excellent tensile and bending strength of the previous version of ABS-like resin + , ABS-Like resin Pro 2 strengthens the toughness performance, increases the elongation at break by more than 100%, and the finished model is stronger and more durable, which can be used to print high-strength and high-toughness models such as structural parts, industrial prototype parts, and fixtures.

Resin Parameters

UV wavelength	365-405nm	Elongation at break	30-40%
Density	1.1-1.2g/cm³	Molding shrinkage	4.3-5.6%
Viscosity	300-400 cP·mPa·s	Flexural strength	40-50 MPa
Felxural modulus	>1000-1200 MPa	Hardness	82-84D
Heat deflection temp	>60-65℃	Tensile strength	85-45 MPa
Bottom exposure time	>20-40s	Normal exposure time	1.5-3s (color screen 8s)
Resin wash	Alcohol	Conservation period	1.5 Year

Model Print

Recommended Printing Parameters

Printer Model	Layer Thickness	Exposure Time	Light-Off Time	Bottom Exposure Time	Bottom Layer	Anti-Aliasing Level	Z Lift Distance	Z Lift Speed	Z Retract Speed
Photon Mono M7 Pro	0.05mm	2s	0.5s	25s	4	1	8mm	6mm/s	6mm/s
Photon Mono M5s Pro (Normal printing mode)	0.05mm	3.6s	0.5s	30s	5	1	8mm	6mm/s	6mm/s
Photon Mono M5s Pro (Fast printing mode)	0.1mm	4s	0.5s	30s	5	1	5mm	20mm/s	20mm/s
Photon Mono M5s (Normal printing mode)	0.05mm	2.8s	0.5s	25s	5	1	8mm	5mm/s	6mm/s
Photon Mono M5s (Fast printing mode)	0.1mm	3s	0.5s	25s	6	1	5mm	20mm/s	20mm/s
Photon Mono M5	0.05mm	2.8s	0.5s	25s	5	1	8mm	5mm/s	6mm/s
Photon M3 Max	0.05mm	3s	2.5s	35s	6	1	10mm	2mm/s	3mm/s
Photon Mono X 6Ks	0.05mm	2.5s	0.5s	20s	5	1	8mm	3mm/s	4mm/s
Photon Mono X2	0.05mm	2.5s	0.5s	20s	5	1	8mm	2mm/s	3mm/s
Photon Mono 2	0.05mm	2.5s	1s	25s	5	1	6mm	4mm/s	6mm/s
Photon D2	0.05mm	2.5s	1s	28s	5	16	5mm	2mm/s	3mm/s
Photon M3 Plus	0.05mm	1.5s	0.5s	25s	6	1	6mm	6mm/s	6mm/s
Photon M3	0.05mm	2s	0.5s	25s	5	1	6mm	3mm/s	4mm/s
Photon M3 Premium	0.05mm	2.5s	0.5s	25s	2	1	8mm	6mm/s	6mm/s
Photon Ultra	0.05mm	2s	1s	35s	5	4	5mm	2mm/s	2mm/s
Photon Mono X	0.05mm	2s	0.5s	28s	4	1	8mm	2mm/s	3mm/s
Photon Mono 4K	0.05mm	2s	0.5s	40s	6	1	6mm	4mm/s	6mm/s
Photon Mono X 6K	0.05mm	2s	0.5s	25s	6	1	8mm	2mm/s	3mm/s
Photon Mono SQ	/	/	/	/	/	/	/	/	/
Photon Mono SE	/	/	/	/	/	/	/	/	/
Photon Mono	0.05mm	2s	0.5s	40s	6	1	6mm	4mm/s	6mm/s
Photon S	/	/	/	/	/	/	/	/	/

Color Type

Instructions for Use

(1) Before use:
Shake the liquid resin before use;
Clean the resin tank and the molding platform to keep the bottom of the resin tank in light
transmission.

(2) When using:
Unscrew the cap and add it to the resin tank according to the equipment requirements;
Select the correct print parameters and settings for printing.

(3) After use:
After printing, please use the matching tools for post-processing, including blade, diagonal
pliers,tweezers,containers,gloves;
ethanol(≥95%),lactate or isopropyl alcohol cleaning solution;

(4) Post-processing steps:
A. Remove the printed model from the molding platform with a blade;
B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken
out and drained; ANYCUBlC Wash and Cure machines are suggested to ensure better effect.
C.Proper processing, such as removing support, polishing, coloring, etc.

Precautions

The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light
to avoid high temperature or sunlight.
Suggested operating temperature is 18-35'c, and a low temperature may affect the printing effect, thus, the
resin can be properly preheated before use (not more than 60°C).
If the resin pigment settles, it can be used after stirring or shaking.
In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
To ensure the mechanical properties of the model, please perform post-curing in time after cleaning and drying.
To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the
light source after curing.Therefore, the following steps are recommended:
(1) The intensity of mercury lamp or LeD light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
(2)The exposure time in the sun (summer) is around 1 hour;
(3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury
lamps is prohibited.
(4) lt is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive
material.

Ps: Material properties willvary depending on the molding equipment, post-curing method and testing equipment. For safetyinformation
please refer to the MSDS of this product. lf you encounter any problems while using, please feel free to contact us.

FAQs

What models are suitable for printing with ABS-Like Resin Pro 2?

ABS-Like Resin Pro 2 is ideal for printing prototype appearances and structural parts of animation and game action figures, consumer electronic shells, silicone molded parts, load-bearing structural parts, tooling fixtures, and snap-on parts.

Does it have a strong odor? What can be used to clean and cure the models?

ABS-Like Resin Pro 2 has a slight odor and can be cleaned using isopropyl alcohol. A Wash & Cure Machine is recommended for curing.

Where can I find the recommended printing parameters for Anycubic's printers when using ABS-Like Resin Pro 2?

You can view the recommended printing parameters on this details page. If you do not find the results you want, please contact our support team for answers.

Where can I download the MSDS file?

Click here to download the MSDS of the resin.

If I buy 3KG of resin, will I receive a 3KG bottle of resin?

When you purchase 3KG of resin, you will receive three 1KG bottles, not one single 3KG bottle. This applies to other quantities as well.

Where can I download the model for free?

Click here to download the free model.

What should I do if my model keeps failing to print?

Click here to download the free model.If you are unable to print or printing fails, please contact our support team for answers.

What should I do if I receive resin that is leaking?

If your resin is leaking, it might have been damaged during transportation. Please take pictures of the product you received and contact our customer support team. They will assist you in resolving the issue.

ABS-Like Resin Pro 2 10-100kg Deals