1KG / US / Tropical Turquoise
- 1KG / US / Spring Leaf
- 1KG / US / Tropical Turquoise
- 1KG / US / Peach Fuzz
- 1KG / US / Interstellar Violet
- 1KG / EU / Spring Leaf
- 1KG / EU / Tropical Turquoise
- 1KG / EU / Peach Fuzz
- 1KG / EU / Interstellar Violet
- 1KG / UK / Spring Leaf
- 1KG / UK / Tropical Turquoise
- 1KG / UK / Peach Fuzz
- 1KG / UK / Interstellar Violet
- 1KG / CA / Spring Leaf
- 1KG / CA / Tropical Turquoise
- 1KG / CA / Peach Fuzz
- 1KG / CA / Interstellar Violet
- 1KG / AU&NZ / Spring Leaf
- 1KG / AU&NZ / Tropical Turquoise
- 1KG / AU&NZ / Peach Fuzz
- 1KG / AU&NZ / Interstellar Violet
- 1KG / Other / Spring Leaf
- 1KG / Other / Tropical Turquoise
- 1KG / Other / Peach Fuzz
- 1KG / Other / Interstellar Violet
- 1KG * 4 / US / Random 4 Colors
- 1KG * 4 / EU / Random 4 Colors
- 1KG * 4 / UK / Random 4 Colors
- 1KG * 4 / CA / Random 4 Colors
- 1KG * 4 / AU&NZ / Random 4 Colors
- 1KG * 4 / Other / Random 4 Colors
Recommended Printing Parameters
Kobra 2 series | Kobra 3 series | |
Retraction Length | 1-1.5mm | 0.8-1mm |
Cooling Time | 12s | 14s |
Max Volumetric Speed (Flow Rate) |
12mm³/s | 12mm³/s |
Minimal Print Speed | 20mm/s | 20mm/s |
Extrusion Multiplier | 0.95 | 0.95 |
Temperature | 200-210℃ (recommended is 200℃) |
190-230℃ (recommended is 215℃) |
Model Print
Anycubic PLA Pantone Filament
Attention
How to install consumables
1.Install the spool on the spool holder of a 3D printer, and preheat the nozzle.
2.Cut the top of the filament into a spire shape, and thread it into the extruder and feeding tube.
3.Manually push the filament through the feeding tube to the nozzle until the filament melts through the nozzle.
FAQs
If I buy 3KG of filament, will I receive a 3KG roll of filament?
If I buy 3KG of filament, will I receive a 3KG roll of filament?
When you purchase 3KG of filament, you will receive 3 rolls of 1KG each, not one roll of 3KG (same for other quantities).
If I purchase "Random Color", how many colors of filament will I receive?
If I purchase "Random Color", how many colors of filament will I receive?
Random color means the color is uncertain. We will send you the filament of the required color according to your needs. If you have no special requirements, or a certain color is out of stock, the color will be randomly selected, but we will guarantee to send you at least two colors of filament.
What should I do if the filament I received has problems with quantity, color, or other problems?
What should I do if the filament I received has problems with quantity, color, or other problems?
If there are any problems with the filament you received, please contact our support team for answers.
Where can I learn about the settings for different filaments?
Where can I learn about the settings for different filaments?
Click here to learn about filament settings here.
Do all Anycubic filaments have an RFID chip?
Do all Anycubic filaments have an RFID chip?
No, only PLA Pantone has an RFID chip. For filaments without RFID chips, you need to switch colors manually when printing.
- Choosing a selection results in a full page refresh.